Bell EXPRESSVU Technical Information PDF herunterladen (Seite 50)

SCAN FOR DEVICE CODES

If the code for your device is not listed in the tables starting on page 4-11, use this

procedure to scan the remote control’s memory for the device code.

1. Turn the device on.

Use the device’s front panel buttons or its remote control.

2. Press and hold the mode button until all the other mode buttons light up, and then let

go of the button.

The mode button flashes.

For example, hold the TV mode button for a TV until all of the other mode buttons

light. When you let go, the TV mode light will flash.

3. For Aux mode only:

• Press 0 for a second TV.

• Press 1 for a second VCR or DVD player.

• Press 2 - for a tuner or amplifier.

This step is for programming which kind of device that should be programmed in Aux

mode. If you’re not programming in Aux mode, skip to step 4.

4. For Aux mode only: Press the Star (*) button.

5. Press the blank Power button.

This puts your remote in the scan mode.

6. Press the up or down arrow button repeatedly until the device turns off.

As you press the up or down arrow button, the remote is trying each code in the

memory to see if it can turn off your device. When the device turns off, you have

found a code that might work.

Note: The mode button for the device will flash rapidly eight times when you’ve

scanned all the codes for that device.

7. Press the Pound (#) button.

This stores the code you found.

8. Turn the device back on and try some other appropriate buttons to make sure

they work.

Press the blank Power button to turn the device back on. Try some other buttons

to make sure they work. Sometimes, the blank Power button works when other

buttons don’t.

9. Repeat this procedure until you’ve tried all the codes.

You may need to repeat the scan to find the best code for your device.

Page 3-50

User Guide

4100_Ch3_eng 6/15/05 8:34 AM Page 50

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Keine Kommentare

Bell EXPRESSVU Technical Information Seite 50