Bell EXPRESSVU Technical Information Seite 49

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 56
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 48
Page 3-49
Using The System
Control Other Devices With The Remote Controls
SET UP THE REMOTE CONTROL
1. Turn the device on.
Use the device’s front panel buttons or its remote control.
2. Find the brand name of the device in the tables starting on page 4-11.
If the brand isn’t listed, see Scan for Device Codes on page 3-50.
3. Press and hold the mode button until all the other mode buttons light up, and then let
go of the button. The mode button flashes.
For example, hold the TV mode button for a TV until all of the other mode buttons
light. When you let go, the TV mode light will flash.
If you are repeating this procedure to program a combination device, be sure to press
the correct mode button (for example, if you have a TV/VCR combination and you
have already programmed the remote to control the TV, press and hold the VCR mode
button as described above).
If no button is pressed, after a few seconds the mode button stops flashing and the
remote control reverts to normal operation.
4. For Aux mode only:
Press 0 for a second TV.
Press 1 for a second VCR or DVD player.
Press 2 - for a tuner or amplifier.
This step is for programming which kind of device that should be programmed in Aux
mode. If you’re not programming in Aux mode, skip to step 5.
5. Enter one of the three-digit device codes from the table using the number buttons.
The three-digit device code should be for the brand name of your device that you
found in step 2.
6. If you want to program limited mode, press 1. If not, skip to step 7.
See Limited Mode for more information.
7. Press the Pound (#) button.
If you entered the code correctly, the mode button flashes three times.
8. Press the blank Power button to turn off the device. If the device does not turn off,
go to step 10.
If the code works, the device should turn off.
9. Turn the device back on and try some other appropriate buttons to make sure they
work. If the code works for other buttons, stop here.
Sometimes the blank Power button works when other buttons don’t.
10.
If the code doesn’t work, redo steps 3 through 9 with another device code from
the tables.
Try every code listed for the brand until one works for your device.
11.
If you can’t find a code that works try Scan for Device Codes that follows.
4100_Ch3_eng 6/15/05 8:34 AM Page 49
Seitenansicht 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare